HT4 Heat Resistant Grease Paste (450°C)

1. Characteristics of Heat-resistant Lubricating Grease – HT4 Paste contains lubricants, including: 

• Molybdenum disulphide (excellent in heavy-duty lubrication).
• PTFE (excellent in lubricating plastics).
• Lead and soft metals (excellent in lubrication at extreme temperatures).
• Prevents thread burn and wear over long periods of time if applied in a thin layer when assembling, tightening bolts, etc.

HT4 Paste can withstand temperatures from 0°C to 450°C in humid and chemical environments.

• Has a long service life in high-temperature, heavy-load lubrication applications, both low-speed and high-speed.
• Sealing: HT4 Paste does not flow like soap-based greases, and therefore its consistency and composition remain unchanged at high temperatures. Provides good sealing and continuous lubrication even in areas subject to vibration.
• HT4 Paste is also effective in corrosive environments.

2. Product application: 

• Used to lubricate parts such as bolts, nuts, heat-resistant bearings, and machinery in high-humidity and high-temperature environments exposed to chemicals.
• Suitable for preventing thread burnout at the screw head and nozzle head of the press machine.

3. Method of use: 

• Clean the part to be serviced with cleaning solution.
• Use your hands to apply enough grease to seal the surface and joints that need protection.

Note: 

• Bearing Housing: The bearing housing should be designed to completely flush out old lubricant when re-greasing. Additionally, the bearing should be disassembled for routine maintenance, and the entire grease volume replaced.
• Health and Safety: HT4 Paste is unlikely to present any significant health or safety hazard when used as recommended, and good industrial hygiene and safety standards are maintained.